Trulite Glass & Aluminum Solutions’ SB750 Curtain Wall System is specifically engineered for low to mid rise projects. The 2-1/2″ x 7-1/2″ curtain wall utilizes a pressure bar glazing method with an option for vertical butt glazing. It can be glazed with 1/4″ or 1″ insulated glazing infill. The SB750 is available in a shear clip assembly method providing accurate and quick joinery. The SB750 system also offers alternative back members to provide alternative system depths to meet project requirements. The innovative two piece horizontal back member utilizing a snap in horizontal flat filler truly makes this curtain wall an easily fabricated and installed system. Its minimum profile outside corner designs complete the aesthetic appeal of an all glass façade. Trulite’s 200, 300 & 500 entrances are easilyintegrated into this system.
The SB750 Pressure-Glazed Curtain Wall System is designed for commercial, institutional, and mixed-use projects that demand strength, flexibility, and modern aesthetics:
Mid- to high-rise office buildings and retail centers – Offers a sleek, front-set pressure plate design for large-span glazing.
Schools, municipal, and government facilities – Provides dependable thermal and structural performance for civic projects.
Healthcare, hospitality, and mixed-use developments – Combines visual impact with energy efficiency for high-profile façades.
Renovation or retrofit projects – Integrates seamlessly with Trulite entrances, storefronts, and accessories for cohesive building envelopes.
Front-Set Pressure Plate Curtain Wall – Available in system depths of 6″, 7-1/2″, and 10″ to accommodate different spans and design requirements.
Tubular Vertical Mullions – Engineered for multi-span applications and enhanced rigidity.
Vertical Butt-Glaze Option – Enables unobstructed glass-to-glass joints for a contemporary aesthetic.
Optional Face Members & Open-Back Components – Increases design flexibility and simplifies fabrication.
Non-Impact Florida Product Approval #17881 – Complies with regional performance standards.
Engineering & Fabrication Support – Backed by Trulite’s expert technical team for complex projects.
Premium Finishes – Architectural Class I/II anodized coatings or AAMA 2604/2605 high-performance organic finishes available.
Air Infiltration (ASTM E283) – Does not exceed 0.06 cfm/ft² at 6.24 psf static pressure.
Water Resistance (ASTM E331 / AAMA 501.1) – No uncontrolled water infiltration at 15 psf under static or dynamic testing.
Structural Performance (ASTM E330) – ±40 psf design pressure; tested at 1.5× design load without exceeding L/175 deflection, glass breakage, or permanent deformation.
Seismic & Wind-Induced Drift (AAMA 501.4) – Tested for specified design displacement (elastic) and 1.5× displacement (inelastic).
Thermal Performance (NFRC 102 / AAMA 1503) – U-value of 0.42 Btu/hr-ft²-°F for energy-efficient performance.
Durability & Warranty – Backed by Trulite’s two-year standard manufacturer’s warranty.
System Compatibility – Designed to work with Trulite storefronts, entrances, and glazing accessories for a complete façade solution.
AutoCAD (dwg)
Detail Book (pdf)
Online Brochure
Revit BIM (rvt)
Florida Building P/A
Miami-Dade NOA
Texas Dep't of Ins.